Place it, mark it, verify it reads. Every part.
Vision-guided printing, application, and verification of labels, codes, and direct part marks across high-mix production.
The work is changing faster than you can staff it.
The dexterous, high-mix, contact-rich jobs are exactly the work classical automation was never built to hold — and the people who used to absorb it are getting harder to find.
Serialization is now mandated
Rules like DSCSA and UDI require unique, verifiable codes on individual units with intact parent-child aggregation. Manual serialization is error-prone at volume; a single duplicated or unreadable code stalls shipments and breaks the traceability chain regulators expect.
Mislabels drive costly recalls
A wrong label or unscannable code is among the most common, most expensive defects to escape a plant. Closed-loop verification catches the bad part at the cell, before it reaches a customer, an audit, or a recall notice.
Traceability without the headcount
High-mix lines demand constant relabel changeovers and full-rate code checks that wear on manual labor. A cell that reconfigures per part and verifies every code holds the line rate while keeping the record complete and audit-ready.
What the service covers.
One cell, reconfigured per part — not a new machine for every job on the floor.
Print and apply
Print a label on demand and apply it to a located surface within tolerance.
Label varied parts
Place labels accurately across mixed geometries, curved housings, and inconsistent surfaces.
Direct part marking
Laser or dot-peen a permanent serial or logo directly onto the part.
Date and lot coding
Inkjet date, lot, and batch codes onto packaging or part surfaces in line.
Serialization
Assign and apply unique serial numbers per unit for DSCSA or UDI compliance.
Code verification
Scan and grade every barcode or 2D matrix for legibility before release.
One cell. Assembly, inspection, finishing.
Qualified off-site. Running in two weeks.
The slow, hard engineering happens on our floor — so the cell arrives tested and dialed in instead of tying up your team for months. A new part is a reconfiguration, not a rebuild.
- 01ScopePart, takt, fixturing, and safety boundary fixed upfront.
- 02Pre-buildCell built and tuned at Relling HQ, not your line.
- 03ConfigureSized and fixtured to your exact part.
- 04QualifyProven safe and capable before it ships.
- 05PilotFirst production run on your line.
- 06ProductionRunning the work, shift after shift.
- 07FleetAdd cells as the work pays for them.
Everything arrives in one qualified unit.
Arm, sensing, tooling, software, and safety, selected for your part and qualified as a set.
Manipulator & end-effector
Arm and tooling selected for your part, qualified as a set.
Closed-loop vision
Finds the part, adjusts in real time, verifies its own work.
Skill library & runtime
A new part is a reconfiguration, not a rebuild.
Safety & technician interface
Guarding sized to your floor, failures explained in plain language.
Will it fit your aisle? Yes.
Representative configuration. Final specs are issued with the proposal.
The Labeling, Marking & Serialization brief.
A deeper look at the work, the integration path, and how qualification maps to your process. PDF, 2026.
Bring a Relling workcell to your floor.
We started Relling to help American manufacturers make more of what this country needs. We'll scope a single cell to your parts, qualify it before it ships, and stand behind it on your floor.
